eLockIn 204
- digital quad-channel high-frequency Lock-In Amplifier -
The extraordionary filtering quality of this lock-in amplifier
resulting in more than
130 dB Dynamic Reserve
is achieved by a well chosen oversampling rate of 40 MHz and
a fully digital design with 96 bit wide digital filters.
This warranties best results in all input ranges and allows for
the display of 7 digits
of the 32 bit wide floating point results
on all demodulation output channels.
The dedicated analogue input stage
is designed for lowest noise ,
a small input capacitance and
optimized for 1 MHz bandwidth .
Colored Spectrum Display / Spectrum Analyser / Oscilloscope
Dual Input / Dual harmonic / Dual Reference
Sine Wave Generator / Internal and External Reference
Web-interface for Remote Control and Data Tracking
Measurement control system with 8 A/D channels and 4 Auxiliary D/A channels
>150 MB Internal Data Storage / USB Data Transfer at Front Panel
Main screen of the lockin display
Spectra screen
External generator with 0.06 Vpp and 1 MHz sine wave connected to input A of the eLockIn 205.
Oscillloscope screen
Manual
(1.3 MB)
LockInRemote
(1 MB)
Contains DLL (Win32/Win64) and 'LockInRemote' application with source code and also LabView, Matlab and Python examples.
Dynamic Reserve
>135 dB
Remote control
Ethernet
Integrated Oscillator
10 mHz ... >1 MHz (3 mHz resolution)
Noise @ 1 kHz
< 6 nVrms /Hz 0.5
Time constants
100 µs... 1 ks
Sensivity ranges
10 nV ... 10 V
Phase resolution
0.0001 deg
Frequency stability @ 10 kHz
50 mHz/year (@ 20 °C +/- 3 °C)
Special features in brief
Digital 4-channel LockIn amplifier between 3 mHz and 1 MHz with reference output and reference input (1st
to 15th harmonic) with approximately 40 kHz update rate
dual input allows the modes A, A-B and A&B
spectrum analyzer
analogue output of 4 channels with 156 kHz sampling rate
4 channel oscilloscope (4 out of 28 LockIn channels and 8 external channels)
measurement system with 8 AUX-In and 8 AUX-Out with 24 bit resolution and 160 kHz update rate
USB and Network connection, parallel and serial port
>150 MB data space
Webserver for web access of all data
reference input with less than 10 degree phase deviation (over the full frequency range)
Reference Output
Internal Oscillator
10 mHz .. > 1 MHz
Frequency Resolution
< 3 mHz
Frequency Accuracy
± 50 ppm from 0°C to 70°C
Reference Output Voltage
< 1 mVpp ... max. 20 Vpp
Output Noise @ 100 kHz for 0.1 mVrms output
< 60 nV/√Hz
Reference Input
Frequency range
1 Hz to 1 MHz
Locking time
< 10 periods + 200 ms
Phase error
< 10 degree @ 1 MHz
Specification of the LockIn amplifier
Signal Input
Voltage Input
BNC
Input Impedance
1 MOhm || 12 pF
Damage Threshold
> +/- 12 V
Bandwidth
dc to > 1 MHz (3 dB bandwidth)
Full Scale Input Ranges
± 5 V (high dynamic reserve)
± 500 mV (normal)
± 50 mV (low noise)
Full Scale Sensitivities
10 nV, 20 nV, 50 nV, ...
logarithmic till 10 V
Typical Input Noise:
@ 100 kHz, high dynamic
< 300 nV/√Hz
@ 100 kHz, normal dynamic
< 50 nV/√Hz
@ 100 kHz, low dynamic
< 6 nV/√Hz (typ. 5 nV/√Hz)
RollOff
6 dB/oct, 12 dB/oct, 24 dB/oct
Time Constants
0.1 ms ... 1 ks
to eLockIn 203
to eLockIn 205